The purpose of this page is to assist customers in understanding the differences in risers we offer. There are pictures to show a close up of the throat area of each riser and also a picture showing the sight picture of each riser.There will also be information to help understand the difference between a standard wrist riser or a low wrist riser.

Circumference of the throat on ST is 4-1/16", front to back 1-1/2'' width 1''
Picture on the left has a black line to show the 3/8" drop of the wrist if you select a ST low wrist.
The most noticeable difference between an ST and JK is the added material in the throat area.

Circumference of the throat on JK is 4-3/8", front to back 1-11/16'', width. 1''
Picture on the left has a yellow line to show the 3/8" drop of the wrist if you select a JK low wrist.
The most noticeable difference between an ST and JK is the added material in the throat area.

Circumference of the throat on 3D is 3-5/8". front to back 1-3/8'' and width 1-1/4''
There is not a wrist variation available on this riser. What you see is what you get.
The most noticeable difference with this riser is the emphasized locater grip shape.
The max weight of limbs that can be used is 50#'s. If that does not fit your specifications check out the 3DH or you can always go with an aluminum 3D riser.

Circumference of the throat on RC is 4-3/4", front to back 1-5/8'',and width 1-3/8''
This riser is larger to hold on to than the other 14" Risers.
Notice the larger palm swell on riser in comparison to others.

Circumference of the throat on RC2 is 5-3/16'' Front to back 1-7/8'' Width 1-1/8''
Weighs in at 29oz
The RC2 is very similar to the JT riser because they both have the Hoyt high wrist format
This riser can be modified to be a low, medium, or high wrist.
The RC2 has no finger groves

JT & JT Lite 6061 Aluminum Details

        Circumference of the throat on the JT is 4-7/16’’, Front to Back 1-1/2’’, and width 1-1/8’’
        Hoyt high wrist format.
        This Riser Grip can be modified to be a low, medium, and high wrist.
         and light or standard models 
       Standard weighs in at 28.5 oz and Lite weighs in at 23.4 oz
 

3D & 3D Lite 6061 Aluminum Details

       Circumference of the throat on the 3D 4-3/8’’ with leather grip Front to Back 1-3/8’’ with leather grip, and width 1-1/4’’ with leather grip
       This Riser can be modified by cutting self-past center and having a burger button, you can get either a rubber or leather grip and you can get the 3D in either light or standard weight
       Standard 3D weighs 31oz and Lite with burger button weighs 26oz
 

Circumference of the throat on 3DH is 4-1/16". front to back 1-7/16'' and width 1-1/32''
There is not a wrist variation available on this riser. What you see is what you get.
This riser is very similar to the 3D riser but with added material in the throat area.
This riser does not have the 50# restriction that the regular 3D riser has.

14" ST Riser Details

14" JK Riser Details

14" 3D Riser Details

14" 3DH Riser Details

14" RC Riser Details

14" RC2 Riser Details

14" JT Riser Details

14" 3D Lite Riser Details