Home / Picking a Riser

 

The purpose of this page is to assist you in understanding the differences in risers we offer.

14″ ST Riser Details

Circumference of the throat 4-1/16″
Front to back depth 1-1/2”
Width 1”

The picture on the right has a black line to show the 3/8″ drop of the wrist if you select a ST low wrist.

The most noticeable difference between an ST and JK is the added material in the throat area.

14″ JK Riser Details

Circumference of throat 4-3/8″
Front to back depth is 1-11/16”
Width is 1”

The picture on the right has a yellow line to show the 3/8″ drop of the wrist if you select a JK low wrist.

The most noticeable difference between an ST and JK is the added material in the throat area.

14″ 3D Riser Details

Circumference of the throat 3-5/8″
Front to back depth is 1-3/8”
Width is 1-1/4”

There is not a wrist variation available on this riser. What you see is what you get. The most noticeable difference with this riser is the emphasized locater grip shape.

The max weight of limbs that can be used is 50#’s. If that does not fit your specifications check out the 3DH or you can always go with an aluminum 3D riser.

14″ 3DH Riser Details

Circumference of the throat 4-1/16″
Front to back depth is 1-7/16”
Width is 1-1/32”

There is not a wrist variation available on this riser. What you see is what you get. This riser is very similar to the 3D riser, but with added material in the throat area.

This riser does not have the 50# restriction of the regular 3D riser.

14″ RC Riser Details

Circumference of the throat 4-3/4″
Front to back depth is 1-5/8”
Width 1-3/8”

This riser is larger to hold onto than the other 14″ risers.

Notice the larger palm swell on this riser in comparison to others.

14″ RC2 Riser Details

Circumference of the throat 5-3/16”
Front to back depth is 1-7/8”
Width is 1-1/8”
Weight is 29 oz.

The RC2 is very similar to the JT riser. Both risers have the Hoyt high wrist format.
This riser can be modified to be a low, medium, or high wrist.
The RC2 has no finger grooves.

JT & JT Lite 6061 Aluminum Details

Circumference of the throat 4-7/16’’
Front to Back depth is 1-1/2’’
Width 1-1/8’’

Hoyt high wrist format. This Riser Grip can be modified to be a low, medium, and high wrist.
Can be developed as a light or standard model.
Standard weighs 28.5 oz.
Lite weighs 23.4 oz.

3D & 3D Lite 6061 Aluminum Details

All measurements include the leather grip.
Circumference of the throat is 4-3/8’’
Front to Back depth is 1-3/8’’
Width is 1-1/4’’

This Riser can be modified by cutting self-past center and having a burger button.
Choose a rubber or leather grip.
Standard 3D weighs 31oz.
Lite with burger button weighs 26 oz.